SK Enterprises Mfg LLC
High Performance Pet Products
U-FILL-IT
BEDS
DURA
CRATE
BEDS
CUSTOM
SIZED
BEDS
CONTACT US
Products
ORDERING
RETURNS
PRIVACY
ABOUT CORDURA
FAQ'S
ABOUT US
HOW TO PAY US
CUSTOMER
PICTURES
HOW WE SHIP
DURA-BEDS
SITE MAP
PLASTIC
CRATE
BEDS
Power Drill
1/4" Drill Bit
Marker or pencil
INSTALLING YOUR PLASTIC CRATE BED
Please use the instructions below to
install your plastic airline style crate bed.
Next, take your crate apart as when you took measurements, or click here.
Turn the bottom half of the crate upside down, and lay the bed on top.
One end of the bed will have a seam where it has been closed. Be sure this end of the bed is to the rear of the crate.
Drilling will leave small plastic pieces around the holes inside the crate.
Turn the crate over and remove these small pieces.
PAGE ONE
PAGE TWO
PAGE THREE
Tools to use:
Center the bed all the
way around the crate.
In between each set of ties, make a mark in the center of the angled part of the crate.
Make the mark directly inline with the tie.
Mark each tie location all the way around the crate.
Next comes drilling the holes.
Using a portable drill, start drilling at each marked location.
Go slowly and observe all safety precautions for using a power drill!
PAGE TWO
